Acer C112 - Manual (Page 23)

13
Eng
lis
h
Adjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with a fixed foot for adjusting the image height.
You can also use a tripod (optional) to lift the projector.
To raise the image:
• Release the fixed foot from the bottom of the projector. If the
projector battery is attaching to the projector, detach it before doing
so.
• If you have a tripod (optional), mount the projector to the tripod by
aligning the threaded hole on the bottom of the projector and the head of
the tripod. Spread the legs of the tripod evenly to ensure the projector is in
a steady position.
To lower the image:
• Retract the fixed foot.
• If you are using a tripod (optional), remove the projector from the tripod.
Fixed foot
Tripod