Bios utility, Boot sequence, Enable disk-to-disk recovery – Acer Aspire 5510 User Manual

Page 75: Eng lis h av-in cable

Advertising
background image

65

Eng

lis

h

AV-in cable

The AV-in cable can be used to connect your notebook to a DVD player or
camcorder for viewing, capturing and recording video clips.

1

Plug the single end of the cable into the AV-input port of your notebook.

2

Connect the other ends to the S-video or composite audio/video jacks on
your DVD player, camcorder or other compatible device.

Note: Extension cables may not be necessary. For more details on how to capture TV or
video clips please refer to the Acer Arcade help file.

BIOS utility

The BIOS utility is a hardware configuration program built into your
computer's BIOS.

Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run it.

To activate the BIOS utility, press <F2> during the POST; while the notebook PC
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select Main from the categories listed at the top of the screen. Find D2D
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this
value to Enabled.

Video

Audio

L

R

VHS

Camcorder

Notebook

AV-in

Y

R

W

S

Y

R

W

S

Y

R

W

S

AV-in

Advertising