Acer K137 - Manual (Page 25)

15
English Color
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Display Mode There are many factory presets optimized for various types of
images.
• Bright: For brightness optimization.
•
Standard: For common environment.
• Movie: For brighter and general movie/video/photo playing.
• Picture: For graphic picture.
• Game: For game content.
•
User: Memorize user’s settings.
Wall color Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Brightness Adjust the brightness of the image.
• Press to darken image.
• Press to lighten the image.
Contrast "Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
• Press to decrease the contrast.
• Press to increase the contrast.
Saturation Adjust a video image from black and white to fully saturated color.
• Press to decrease the amount of color in the image.
• Press to increase the amount of color in the image.
Tint Adjust the color balance of red and green.
• Press to increase the amount of green in the image.
• Press to increase the amount of red in the image.
Advanced Color Temperature
Adjust the color temperature. At higher color temperatures, the screen
looks colder; at lower color temperatures, the screen looks warmer.
Degamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Dynamic Black
Choose "On" to automatically optimize the display of dark movie
scenes enabling them to be shown in incredible detail.