Acer P1266i - Manual (Page 32)

20
English
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Image
Tint Adjusts the color balance of red and green.
• Press to increase the amount of green in the image.
•
Press to increase the amount of red in the image.
Projection Front-Desktop
•
The factory default setting.
Front-Ceiling
•
When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear-Desktop
•
When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
• When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Keystone Adjust image distortion caused by tilting projection. (±40 degrees)
Aspect Ratio Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.