Acer Altos G510 - Manual (Page 5)

v
• The RAID-1 feature only supports 2 hard disk drives (one RAID-1
volume with one spare HDD).
• Currently, synchronization does not perform real-time updating. It
is stronlgly recommended that you exit LSI Logic Configuration
Utility after IM configuration is complete.
• The SAF-TE feature, which enables the HDD fault indicator during
RAID rebuild or initialization is supported at the driver level on
Windows platforms only. Other operating systems, including Red
Hat Linux, Netware, Openserver, and UnixWare do not support the
SAF-TE feature.
• Since the IM utilizes the onboard LSI 53C 1020 SCSI controller only,
there is no cache on the controller itself.
BB!H621!.!FO/cppl!!Qbhf!w!!Uivstebz-!Kvof!23-!3114!!2;34!QN