Xylem 1580 Series In-Line Mounted Centrifugal Fire Pumps AC2516 REV.B - Manual

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
Series 1580 In-Line Mounted
Centrifugal Fire Pumps
DESCRIPTION
The Series 1580 Inline Centrifugal Fire Pump is a close
coupled pump which features – high efficiency, rugged
construction, and in-line mounting. These features make
installation, operation and service easy to perform.
OPERATIONAL LIMITS
Unless special provisions have been made for your pump by
AC Fire Pump Systems, the operational limits for Series 1580
Pumps are as follows:
MAXIMUM WORKING PRESSURE
Listed on pump nameplate.
SEAL OPERATING LIMITS
PACKING
PH Limitations 7-9; Temperature Range 0 to +200°F
For use on open or closed systems which require a large
amount of makeup water, as well as systems which are
subjected to widely varying chemical conditions and solids
buildup.
INSTRUCTION MANUAL
AC2516
REVISION B