Bell & Gossett DN0178B HS Single Phase Simplex Control Panel - Manual

INSTRUCTION MANUAL
DN0178
REVISION B
Hoffman Specialty ®
Single Phase Simplex
Control Panel
6 3 /
4
(171)
NEMA 4 ENCLOSURE
6x6x4.03
(152x152x110) Dimensions in Inches (mm)
4 (102)
5 /
16
(8) Mounting Hole
(4 Places)
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
SAFETY
INSTRUCTIONS
This safety alert symbol will be used in this manual and on
the unit safety instruction decals to draw attention to safety
related instructions. When used, the safety alert symbol means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN
A SAFETY HAZARD.
If the decals as noted to the right are missing or are illeg-
ible contact your local Hoffman Pump representative for a
replacement.
1. Electrical connections to be made by a qualified Electrician
in accordance with National, State or Local codes.
2. Motor must be sized in accordance with contactor rating
and have internal overload and undervoltage protection.
USE COPPER WIRE ONLY
6 0°C INSULATION RATING FOR AMPACITIES LESS THAN 100A
7 5°C INSULATION RATING FOR AMPACITIES GREATER T H A N 100A
G R D
S80379
DNO442
CAUTION
USE TYPE FUSE
A M P
DNO443
PUMP ✽ RUNNING
DN0430
V56846
CAUTION:
DISCONNECT MAIN POWER
BEFORE SERVICING DN0445
WARNING
BEFORE INSTALLING,
USING OR SERVICING
THIS PRODUCT, READ
THE WARNING NOTES
AND INSTRUCTIONS
IN INSTRUCTION
MANUAL. FAILURE TO
DO SO MAY RESULT
IN SERIOUS INJURY
OR PROPERTY DAMAGE.
MODEL NO. 161029
CONTROL VOLTS: 120 VOLT A.C.
PUMP SELECTION
VOLTS: 120/240 VAC HZ: 60 HZ
PHASE: 1 PHASE FLA: 20 AMPS
DN0444
Bell & Gossett
M Illinois 60053 orton Grove,
B&G
Dimensions in Inches (mm)