Bell & Gossett HS 213B Series B2 Inverted Bucket Steam Trap Service Parts - Manual

INSTRUCTION MANUAL
HS-213
REVISION B
®
IP Internal Parts Kit Bucket Assembly Cover Assembly
• Before using product, read and understand instructions.
• Save these instructions for future reference.
• All work must be performed by qualified personnel trained in the proper application,
installation, and maintenance of steam systems in accordance with all applicable codes
and ordinances.
• To prevent serious burns, wear heat resistant gloves when opening and closing steam
valves, or handling hot equipment.
• To prevent serious burns, the internal pressure of the trap must be 0 psi (0 bar) before
servicing.
• To prevent serious personal injury from steam pipe blow down, connect a drain pipe to
the control opening to avoid exposure to steam discharge.
Failure to follow this caution will cause personal injury.
IMPORTANT: To prevent system damage from
water hammer or sudden shock, open supply
valves slowly.
The trap seat rating (stamped on the nameplate)
must be equal to or greater than the maximum
pressure differential across the trap.
WAR NING
CAUT ION
! CAUTION
Hoffman Specialty ®
Series B1 and B2
Inverted Bucket Steam Trap
Service Parts