Bell & Gossett V02300D ThermoMate Thermostatic Control Valves - Manual

DESCRIPTION
ThermoMate Thermostatic Control Valves are silent, efficient,
energy saving non-electric control valves that provide reliable
temperature control for hydronic and low pressure steam termi-
nal units. The temperature range of ThermoMate Control Valves
is adjustable between 46°F (7.8°C) and 79°F (26.1°C). A drop in
room temperature causes the operator to open the valve.
INSTRUCTION MANUAL
V02300
Revision D
© COPYRIGHT 1981, 1995
BELL & GOSSETT
Installation, Operation and Service Instructions
ThermoMate
®
Thermostatic Control Valves
Bell & Gossett
Morton Grove, IL, U.S.A.
* WARNING: Label Part No. V56871
must be installed in this location.
If missing, must be replaced.
SAFETY
INSTRUCTION
This safety alert symbol will be used in this manual to draw
attention to safety related instructions. When used, the safety
alert symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE IN-
STRUCTIONS MAY RESULT IN A SAFETY HAZARD.
*
*
*
*
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
FIG. A
Baseboard radiation with Model TM42 angle pattern
valve body and Model TM51 self-contained thermo-
static operator. (Thermostatic operator mounted thru
the side panel of the terminal unit cover.) Baseboard radiation with Model TM12 angle pattern
valve body and Model TM51 self-contained thermo-
static operator attached to the TM91 remote mount-
ing base and sensing element. (Remote mounting
base and operator mounted thru the front panel of the
terminal unit cover.)
Convertor with Model TM21 straight pattern valve
body and Model TM61 thermostatic operator with
remote sensing bulb attached to the TM91 remote
mounting base. (Remote mounting base and the oper-
ator mounted thru the front panel of the terminal unit
cover.) Free standing radiator with Model TM42 angle pattern
valve body and Model TM51 self-contained thermo-
static operator mounted on the radiator. Free standing radiator with Model TM12 angle pattern
valve body and Model TM61 thermostatic operator
with remote sensing bulb mounted on the wall along-
side of the terminal unit. Free standing radiator with Model TM12 angle pattern
valve body and Model TM61 thermostatic operator
with remote sensing bulb attached to the TM91
remote mounting base. (Remote mounting base and
the operator are mounted on the wall alongside of the
unit.)
Convector with Model TM21 straight pattern valve
body and Model TM61 thermostatic operator with
remote sensing bulb. (Mounted inside the terminal
unit cover.) Solder adaptor not furnished with valve. Convector with Model TM12 angle pattern valve body
and Model TM51 self-contained thermostatic operator
attached to the TM91 remote mounting base and
sensing element. (Remote mounting base and opera-
tor mounted on the wall outside of the terminal unit.)
FIG. B D . G I F C . G I F
FIG. E FIG. F FIG. H FIG. G