Braun 1775 FreeControl - Manual (Page 10)

11
Alternatively, you may clean the shaver using the brush provided (c):
•
Switch off the shaver. Remove the shaver foil.
• Using the brush, clean the cutter block and the inner area of the shaver
head. However, do not clean the shaver foil with the brush as this may
damage the foil.
Keeping your shaver in top shape
About every four weeks, clean the cutter block with Braun cleaning agents.
Put a drop of light machine oil onto the long hair trimmer and the shaver foil
(d).
Replacing the shaving parts
To maintain 100% shaving performance, replace your foil and cutter block
at least every 18 months or when worn. Change both parts at the same time
for a closer shave with less skin irritation.
(Shaver foil and cutter block: 1000 series)
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity. Do not expose the shaver to
temperatures higher than 50 °C for extended periods of time.
Environmental notice
This appliance is provided with nickel-hydride rechargeable batteries. To
protect the environment, do not dispose of this appliance in the household
waste at the end of its useful life. Open the housing as shown on page 46,
remove and dispose of the batteries at your retail store or at appropriate
collection sites according to national or local regulations.
Subject to change without notice.
This product conforms to the European Directives EMC 89/336/EEC
and Low Voltage 73/23/EEC.
Electric specifications see printing on the special cord set.
At the end of the product's useful life, please dispose of it at
appropriate collection points provided in your country.
FIX_1775_MN Seite 11 Montag, 21. Februar 2005 8:21 08