Xylem handylab OX 12 - Manual (Page 40)

Operation handylab Ox 12
40 ba75369e04 01/2011
4.5.2 Recorder (analog output)
You can transmit data to a recorder via the analog output. Connect the ana-
log output to the recorder via the Z 394 interface cable.
The data output automatically switches to Recorder output.
Socket
assignment
Note
The analog output is activated automatically in the cable by connecting 2 and
3.
The signal range of the analog output depends on the measured variable and
the measuring range (see section 1.4 T
ECHNICAL D ATA ).
3 Set the required interval between the saving procedures with <
▲>
<
▼>.
4 Confirm with <RUN/ENTER>.
The measuring instrument automatically switches to the measuring
mode.
Store Auto
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/ cm
S
8 cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Ident Year
F F O
t 2 n 1
1 free
2 Plug coding
3 Ground
4 Analog output
1 2
3 4
RS 232
REC
(internal resistance < 5 Ohm)