AEG A62300HLW0 - Manual (Page 36)

Problem Possible cause Solution
There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it). Call an electrician.
CUSTOMER SERVICE
If your appliance is still not working prop-
erly after making the above checks, con-
tact the nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the
model and serial number of your appli-
ance which can be found either on the
guarantee certificate or on the rating
plate located on the external right side of
the appliance.
REPLACING THE LAMP
1. Disconnect the mains plug from the
mains socket.
2. Replace the used lamp with a new
lamp of the same power and specifi-
cally designed for household applian-
ces. (the maximum power is shown on
the lamp cover)
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the
lamp comes on.
WARNING!
Do not remove the lamp cover at
the time of replacement.
Do not operate the freezer if the
lamp cover is damaged or miss-
ing.
36