Xylem CHATTER Notification System configuration guide - Manual (Page 24)

MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
24
Example:
<cnsNEscanInterval>
10
</cnsNEscanInterval>
Text Text
cnsScanDatabaseTables
by Chatter Notification Engine for new alarms or measurements.
Do not change the values in this key without
consulting MJK Automation ApS!
Name Table
cnsAlarmLog cnsAlarmLog
cnsMeasurementLog cnsMeasurementLog
Example:
<cnsScanDatabaseTables>
cnsAlarmLog
cnsMeasurementLog
</cnsScanDatabaseTables>
Key Description
cnsKeepAliveInterval This key describes how often a software component - Chatter Notification Engine
or a plug-in - will update a record in the table cnsModuleStatus
Database to tell that it is still 'alive'
The value is a number of minutes, valid values are 0 to 1400:
Value Description
0 A software component never tells if it is 'alive'
1 A software component tells if it 'alive' every minute
+++
1440 A software component tells if it 'alive' every 24 hours
Example:
<cnsKeepAliveInterval>
10
</cnsKeepAliveInterval>
Text Text
cnsNotificationLogFile This key describes the name of and the path to the Chatter Notification Engine log
file.
The folder must exist, it will NOT be created by
Chatter Notification Engine.