Xylem 205546 Modbus Communication Modules for Displays - Manual (Page 5)

5
2.1.2 Technical Specifications
Specification Description
Mounting With 4 screws on transmitter’s I/O board
Protection IP 20
Dimensions 51 x 82 mm ( H x W)
Connectors One 5-position plugable screw terminal and one 20-pin bus
connector
Temperature -20 to +60 °C
Settings One “Termination” dip switch
LEDs White LEDs for “5V”, “Rx”, “Tx” and “3V3”
Power consump. Approx. 0.18 VA
Com. type RS 485 asynchronous, half duplex
Baud rate 300, 1200, 4800, 9600, 19200, 38400, 57600, 115200
Parity Even, odd, none
Stop bits 1 , 2
Modbus ID offset 0 - 240
Protocol Modbus RTU
Table 1. Specifications - Modbus and RS 485 Communication Module
2. Communication Modules
Modbus Communication Modules