Bell & Gossett P82893D Series 60 In-Line Centrifugal Pumps - Manual (Page 12)

Product Description
General description
The Series 60 is an in-line mounted centrifugal pump.
This pump is available for pipe sizes that range from 1 in to 2 inches.
This pump also has available power levels that range from 1/4 to 3 hp and 1750 rpm.
Pump application
WARNING:
California Proposition 65 warning! This product contains chemicals known to the state of
California to cause cancer and birth defects or other reproductive harm.
You can use this pump for these types of applications:
• Hydronic heating and cooling
• Domestic hot water
• Industrial fluid transfer
This pump is for indoor use only.
Xylem recommends that you use bronze constructed pumps for pumping potable water.
For other applications, contact your local sales and service representative.
Operational specifications
Operational limitations
Parameter Value
Maximum working pressure 175 psi
Pump construction Bronze fitted or all bronze
Standard mechanical seal
Motors 208-230/460, 575 volts for three phase
115/230 volts for single phase with built-in overload
protection
Mechanical seal specifications
Materials of
Construction
BUNA carbon/ceramic EPR carbon/tungsten
carbide
EPR Sic/SiC Viton carbon/ceramic
Standard/optional Standard Optional Optional Optional
Operating
temperature range
-20˚F to 225˚F (-29˚C
to 107˚C)
-20˚F to 250˚F (-29˚C
to 121˚C)
0˚F to 250˚F (-18˚C to
121˚C)
-10˚F to 225˚F (-23˚C
to 107˚C)
pH range 7.0–9.0 7.0–11.0 7.0–12.0 7.0–9.0
Maximum glycol/
water concentration
50/50% 50/50% 60/40% 50/50%
Maximum suction
pressure
Suction Pressure + TDH must not exceed MWP
Product Description
10 Series 60 Installation, Operation, and Maintenance Manual