Bell & Gossett S11574C Heat Transfer Package with Air Separation - Manual

Heat Transfer Package
with Air Separation
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
DESCRIPTION
Frame mounted heat transfer package consisting of but not
limited to: heat exchanger, air separation apparatus, pump(s),
motor(s), triple duty check valve(s), relief valve(s), pressure
reducing valve, gauge(s), thermometer, and interconnecting
piping. The following options are also available: motor starter(s),
condensate trap, and steam valve.
OPERATIONAL LIMITS
The standard design pressure is 125 PSI unless otherwise indi-
cated. The ASME nameplates will indicate the ratings of the
pressure vessels and relief valves. If a control panel is supplied
refer to the nameplate for operating voltage and full load AMP
current draw.
SAFETY
INSTRUCTIONS
This safety alert symbol will be used in this manual and on
the Heat Transfer Package Safety Instruction decal to draw
attention to safety related instructions. When used, the safety
alert symbol means
ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN A SAFETY HAZARD.
INSTRUCTION MANUAL
S11574C