Allied Solutions Pro-Seal - Manual (Page 2)

When the brush is pressed into place it is supported by the
metal clips. The brush expands sealing the void between the
rear header and the hinge where air and rodents could enter.
Designed, Engineered and Manufactured in the U.S.A. © 2008 Systems, Inc. Pro-Seal 12/08
W194 N11481 McCormick Drive • Germantown, WI 53022
Phone: 262.255.1510 • Fax: 262.255.4199
Toll-Free: 800.643.5424
or visit us on the web at…www.alliedproductsolutions.com
Distributed By:
The Pro-Seal offers the quickest and tightest seal
available. It can be positioned in the rear of the leveler
in under ten minutes. The kit includes all of the neces-
sary tools and equipment to completely seal the rear
of the dock leveler, the hardest area to completely
seal due to the odd shape of the rear hinge area. The
Pro-Seal is positioned on top of specially designed
clips which quickly snap into place using the patented
clip tool included. After the brush is pressed into the
rear hinge area, the seal expands, closing off the gap
in the rear of the leveler. The specially designed tubu-
lar brush seals along every surface completely seals
the rear hinge area, protecting your facility from air
and rodent infiltration. The Pro-Seal is designed to be
installed by anyone without the need for special tools
or adhesives.
Kit Includes:
• Seven hinge clips and two rear brushes
• Enough supplies to completely seal on 6’,
6’ 6” or 7’ dock leveler
• One easy to use install tool
• Detailed full color installation instructions
Rear Brush
Weather Seal