Specifications, Specifications, cont’d – Extron Electronics Audio-Video Switchers User Manual

Page 19

Advertising
background image

Audio/Video Switchers • Specifications

Audio/Video Switchers • Specifications

Specifications, cont’d

Specifications

Video

Gain ............................................... Unity
Bandwidth .................................... 30 MHz (-3dB)
Differential phase error .............. 0.01º, 4.43 to 30 MHz
Differential gain error ................. 0.03%, 4.43 to 30 MHz
Crosstalk ....................................... -70dB @ 3.58 MHz
Switching speed ........................... 160 nS (max.)

Video input

Number/signal type ................... 6 S-video ................................... SW 6 SV

MX, SW 6 SV A MX
6 composite video ................... SW 6 CV
MX, SW 6 AV MX

Connectors .................................... 6 4-pin mini-DIN female ....... SW 6 SV

MX, SW 6 SV A MX
6 BNC female .......................... SW 6 CV
MX, SW 6 AV MX

Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no

offset

Impedance .................................... 75 ohms (all inputs are terminated at 75

ohms)

Return loss .................................... -41dB @ 5 MHz
External sync (genlock) ............... 0.3V to 0.4V p-p

Video output

Number/signal type ................... Individually buffered

2 S-video ................................... SW 6 SV
MX, SW 6 SV A MX
2 composite video ................... SW 6 CV
MX, SW 6 AV MX

Connectors .................................... 2 4-pin mini-DIN female ....... SW 6 SV

MX, SW 6 SV A MX
2 BNC female .......................... SW 6 CV
MX, SW 6 AV MX

Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p
Impedance .................................... 75 ohms
Return loss .................................... -47dB @ 5 MHz
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Vertical interval

Sync

Genlock connectors ..................... 2 BNC female
Standards ...................................... NTSC, PAL, SECAM

A-2

Input level ..................................... 0.3V to 5.0V p-p ........ SW 6 SV A MX

0.5 to 5.0V p-p ........... all other models

Output level .................................. TTL ............. 4V to 5V p-p
Polarity .......................................... Positive or negative (follows input)

Audio — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX
only

Gain ............................................... Unbalanced -15dB to +9dB, balanced -9dB

to +15dB

Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated

maximum output drive

S/N ................................................ >90dB at rated maximum output drive
Crosstalk ....................................... <-65dB @ 20 kHz, <-80dB @ 1 kHz or

below 60 Hz, fully loaded

Stereo channel separation .......... >80dB @ 20 Hz to 20 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz

Audio input — SW 6 SA MX, SW 6 SV A MX, and SW 6
AV MX only

Number/signal type ................... 6 stereo, balanced/unbalanced
Connectors .................................... 6 3.5 mm captive screw connectors, 5 pole
Impedance

SW 6 SV A MX ................. >10 kohms unbalanced, >20 kohms

balanced, DC coupled

SW 6 SA MX, SW 6 AV MX >25 kohms balanced, 50 kohms

unbalanced, DC coupled

Maximum level ............................ +15dBu, (balanced or unbalanced) at

stated %THD+N

Input gain adjustment ................. -15dB to +9dB, adjustable per input

Audio output — SW 6 SA MX, SW 6 SV A MX, and SW 6
AV MX only

Number/signal type ................... 2 stereo, balanced/unbalanced
Connectors .................................... 2 3.5 mm captive screw connnectors, 5

pole

Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ >+21dBu, balanced or unbalanced at

stated %THD+N

Maximum level (600 ohm) ......... >+15dBm, balanced or unbalanced at

stated %THD+N

A-3

Advertising
This manual is related to the following products: