Extron Electronics SVDA 6A MX - Manual (Page 5)

5 Extron • Audio/Video Distribution Amplifiers 4 Extron • Audio/Video Distribution Amplifiers
Installation and Operation (cont.)
CVDA/AVDA 6 MX Dual 2 x 6 BNC female
CVDA 6 MX Quad ........... 4 x 6 BNC female
SVDA 6 MX ....................... 6 x 4-pin mini DIN
Minimum/maximum levels ....... Analog: 0.4V to 1.4V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
DC offset (SVDA 6 MX) .............. ±5mV maximum with input at 0 offset
Sync — CVDA/AVDA 6 MX, CVDA/AVDA 6 MX Dual,
SVDA 6 MX
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio — AVDA 6 MX, AVDA 6 MX Dual, SADA 6 MX,
SADA 6 MX Dual/Quad
Gain ................................................ Unbalanced 0dB, balanced +6dB
Frequency response .................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................. 0.03% @ 1 kHz at rated maximum output
drive
S/N ................................................ >90dB, balanced, at rated maximum
output drive
Stereo channel separation .......... >80dB @ 1 kHz, >60dB @ 20 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio input — AVDA 6 MX, AVDA 6 MX Dual,
SADA 6 MX, SADA 6 MX Dual/Quad
Number/signal type
AVDA 6 MX, SADA 6 MX 1 stereo, balanced (Hi Z or 600 ohms)/
unbalanced (Hi Z)
AVDA 6 MX Dual, SADA 6 MX Dual
2 stereo, balanced (Hi Z or 600 ohms)/
unbalanced (Hi Z)
SADA 6 MX Quad ............ 4 stereo, balanced (Hi Z or 600 ohms)/
unbalanced (Hi Z)
Connectors
AVDA 6 MX, SADA 6 MX 1 3.5 mm captive screw connector, 5 pole
AVDA 6 MX Dual, SADA 6 MX Dual
2 3.5 mm captive screw connectors, 5 pole
SADA 6 MX Quad ............ 4 3.5 mm captive screw connectors, 5 pole
Impedance .................................... >50 kohms unbalanced, >25 kohms
balanced, DC coupled
Maximum level ............................ +24dBu, (balanced or unbalanced) @ stated
%THD+N
Audio output — AVDA 6 MX, AVDA 6 MX Dual,
SADA 6 MX, SADA 6 MX Dual/Quad
Number/signal type
AVDA 6 MX, SADA 6 MX 1 x 6 stereo, balanced/unbalanced
AVDA 6 MX Dual, SADA 6 MX Dual
2 x 6 stereo, balanced/unbalanced
SADA 6 MX Quad ............ 4 x 6 stereo, balanced/unbalanced
Connectors
AVDA 6 MX, SADA 6 MX 1 x 6 3.5 mm captive screw connectors, 5
pole
AVDA 6 MX Dual, SADA 6 MX Dual
2 x 6 3.5 mm captive screw connectors, 5
pole
SADA 6 MX Quad ............ 4 x 6 3.5 mm captive screw connectors, 5
pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ > +24dBu, balanced at stated %THD+N
Maximum level (600 ohm) ......... > +15dBm, balanced at stated %THD+N
0dBu = 0.775 volts (RMS).
General
Power ............................................ 100VAC to 240VAC, 50/60 Hz, internal,
autoswitchable
CVDA 6 MX/MX Dual, SVDA 6 MX, SADA 6 MX
10 watts
CVDA 6 MX Quad, SADA 6 MX Dual
12 watts
AVDA 6 MX ...................... 13 watts
SADA 6 MX Quad ............ 14 watts
AVDA 6 MX Dual ............ 20 watts
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount .................................. Yes, with optional 1U rack shelf, part #60-
190-01
Enclosure type .............................. Metal