Extron Electronics DVI 104 TX_RX User Guide User Manual

Dvi 104 tx/rx • user guide, Fcc class a notice, Application diagram

Advertising
background image

IMPO

RTAN

T:

Go to www

.extron.com f

or the

complete user guide

, installation

instructions,

and specifications.

1

DVI 104 TX/RX • User Guide

The Extron DVI 104 Tx and DVI 104 Rx are fiber optic transmitter and receiver units that extend DVI signals up to 500 meters
(1,640 feet) using four multimode fiber optic cables. Optional four-fiber multimode cables are available in varying lengths.

The transmitter plugs directly into the source device and the receiver plugs directly into the display device.

The transmitter and receiver pair can handle DVI video signals with resolutions up to 1920 x 1200 or 1080p at 60 Hz.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.

NOTE:

This unit was tested with shielded I/O cables on the peripheral devices. Shielded cables must be used to ensure

compliance with FCC emissions limits.
For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see
the “

Extron Safety and Regulatory Compliance Guide

” on the Extron website.

FDA/IEC 60825-1 Requirements

CLASS 1 LASER PRODUCT

Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 5, dated June 24,
2007.
The product is intended to be used with the fiber optic cables fully installed.
This product meets the applicable requirements of IEC 60825-1, Edition 1 (2007).
Any service to this product must be carried out by Extron Electronics and its qualified service personnel.

Application Diagram

PC with DVI Output

DVI 104
Transmitter

DVI 104
Receiver

Hi-resolution
Flat Panel Display
with DVI-D Input

4 Multi Mode
Fiber

Up to 500 meters (1640 feet)

Advertising