Extron Electronics Audio Connector Rev. A User Manual
Cable preparation for audio connections, Do not tin the wires
68-349-03
Rev. A
08 12
Heat
Shrink
1/8"
(3 mm)
7/8"
(22 mm)
3/16" (5 mm) Max.
5-pole Captive Screw Connector
3-pole Captive Screw Connector
3/16" (5 mm)
Max.
Tie Wrap
Cable Preparation For Audio Connections
The length of the exposed wires in the stripping process is critical. The ideal length is
3/16" (5 mm).
• If the stripped section of wire is longer than
3/16", the exposed wires may touch, causing a short
circuit between them.
• If the stripped section of wire is shorter than
3/16", the wires can be easily pulled out even if tightly
fastened by the captive screws.
Do not tin the wires!
Tinned wire does not hold its shape and can become loose over time.
© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners.
www.extron.com
Extron Headquarters
+1.800.633.9876
(Inside USA/Canada Only)
Extron Asia
+65.6383.4400
Extron China
+86.21.3760.1568
Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040
Extron Japan
+81.3.3511.7655
Extron Middle East
+971.4.2991800
Extron India
+91.80.3055.3777
NOTE:
Audio ground pins
may be labeled as or .
The wiring and function
are the same, whichever
way your product is labeled.