Extron Electronics DFX 100 Series User Guide User Manual
Page 12
DFX 100 • Panels and Cabling
6
c
Optical input connector — Connect one end of the multimode fiber optic cable (not
provided) into this LC connector. The other end connects into the LC output connector
on the DFX 100 Tx.
CAUTION:
•
Possible Damage to Eyesight. The DFX 100 Tx outputs continuous laser
(Class 1 rated), which may be harmful and dangerous to the eyes; use with
caution. Do not look into the rear panel fiber optic cable connector or into the
fiber optic cable itself. Plug the attached dust cap into the optical transceiver
when the fiber optic cable is unplugged.
•
Possible radiation exposure. Use of controls or adjustments or
performance of procedures other than those specified herein may result in
hazardous radiation exposure.
When the DFX 100 Rx is receiving optical input, the front panel LED lights green.