Extron Electronics DVI 201 User Guide - Manual (Page 36)

Control/remote — external device (pass-through)
Serial control port input
Transmitter RS-232 via (1) 3 5 mm, 3 pole captive screw connector
Receiver 1 set of proprietary signals on a female RJ-45 jack
Serial control port output
Transmitter 1 set of proprietary signals on a female RJ-45 jack
Receiver RS-232 via a 3 5 mm, 3 pole captive screw connector
NOTE: Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
External power supply 100 VAC to 240 VAC, 50-60 Hz, 6 W max , external; to 12 VDC, 1 A, regulated
Power input requirements 12 VDC, 0 4 A for both transmitter and receiver
NOTE: Each transmitter or receiver can be powered either locally by an external power supply or remotely by
receiver or transmitter on the other end of the CAT 5/5e/6 or Extron DTP26 cable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
115 VAC, 60 Hz
DVI 201 Tx 6 0 BTU/hr
DVI 201 Rx 6 1 BTU/hr
240 VAC, 50 Hz
DVI 201 Tx 11 8 BTU/hr
DVI 201 Rx 11 4 BTU/hr
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional through-desk mounting kit
Pole mount Yes, with optional mounting kit
Enclosure type Metal
Enclosure dimensions
DVI 201 Tx/Rx 1 0" H x 4 3" W x 3 0" D (quarter rack wide)
(2 5 cm H x 10 9 cm W x 7 6 cm D)
(Depth excludes connectors )
DVI 201 A D Tx/Rx
Faceplate 2 6" H* x 1 3" W x 0 1" D
(6 6 cm H* x 3 3 cm W x 0 3 cm D)
(Fits the opening in a 1 gang Decora ® -style wallplate )
*Overall height is 4 1" (10 4 cm) including mounting tabs Mounting holes are 3 8"
[9 5 cm] apart on center
Buffer 2 7" H x 1 8" W x 0 75" D
(6 9 cm H x 4 6 cm W x 1 9 cm D)
(Depth excludes connectors )
Product weight 0 5 lbs (0 3 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
NOTE: **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
DVI 201 • Reference Information 32