Extron Electronics DVS 510 Series User Guide - Manual (Page 32)

DVS 510 Series • Operation 26
Output Configuration Menu
The output configuration menu allows you to set output resolution and refresh rate, output
signal type, and sync polarity (RGBHV only). The following flow diagram shows the output
configuration submenus and the adjustments that can be made from them.
Output
Configuration
Resol 1024 x 768
Refresh
@ 60 Hz
Output Type
RGBHV
Sync Polarity
H – V –
Next Next
Next
Input
Configuration
Menu
Resolution Refresh Rate
Select the output resolution
and refresh rate.
See the table on the next page
for available combinations of
resolutions and refresh rates.
Default: 1024 x 768 @ 60 Hz
Video signal types
Select the output signal format:
• RGBHV (default)
• RGBS
• RGsB
• YUV Bi-level (EDTV standard)
• YUV Tri-level (HDTV standard)
Polarity combinations
Select the sync polarity
combination:
• H – V – (default)
• H – V +
• H + V –
• H + V +
• N/A*
*Appears when a signal type
other than RGBHV is selected.
Next
Next
Figure 16. Output Configuration Menu
Resolutions and refresh rates submenu
While the Output Configuration menu is displayed, rotate the horizontal Adjust ([) knob
to select the output resolution and the vertical Adjust ({) knob to select the refresh rate. The
default resolution and rate for the DVS 510 Series are 1024x768 @ 60 Hz.
The
table on the next page shows the available resolutions and refresh rates on the
DVS 510 Series.