Extron Electronics FOXBOX SR HDMI User Guide - Manual (Page 29)

Command and Response Table for SIS Commands
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional description
Video mute
Mute video output 1B Blk1 ] Blank the video output.
Mute video and sync output 2B Blk2 ] Blank the video and suspend sync.
Unmute video output 0B Blk0 ] Output video and sync.
Show video mute status B X!] Video mute status is X! .
Contrast
Set a contrast value EX@ CONT } Cont X@] Set the contrast level to X@ .
Increment value E +CONT } Cont X@] Increase the setting by one.
Decrement value E –CONT } Cont X@] Decrease the setting by one.
View contrast setting E CONT } X@] View the current setting.
Brightness
Set a brightness value EX@ BRIT } Brit X@] Set the brightness level to X@ .
Increment value E +BRIT } Brit X@] Increase the setting by one.
Decrement value E –BRIT } Brit X@] Decrease the setting by one.
View brightness setting E BRIT } X@] View the current setting.
Detail filter
Set a detail filter value EX# HDET } Hdet X#] Set the detail filter level to X# .
Increment value E +HDET } Hdet X#] Increase the setting by one.
Decrment value E –HDET } Hdet X#] Decrease the setting by one.
View detail filter setting E HDET } X#] View the current setting.
Horizontal shift
Set a horizontal position X$ H Hph X$] Set horizontal centering to X$ .
Increment position +H Hph X$] Shift the image one pixel to the right.
Decrement position –H Hph X$] Shift the image one pixel to the left.
Show position H X$]
Vertical shift
Set a vertical position X$ / Vph X$] Set vertical centering to X$ .
Increment position +/ Vph X$] Shift the image down one line.
Decrement position –/ Vph X$] Shift the image up one line.
Show position / X$]
Horizontal size
Set a horizontal size EX% HSIZ } Hsiz X%] Set the horizontal size to X% .
Increase horizontal size E +HSIZ } Hsiz X%] Make the picture wider.
Decrease horizontal size E –HSIZ } Hsiz X%] Make the picture narrower.
Show horizontal size E HSIZ } X%] Horizontal size is X% .
Vertical size
Set a vertical size EX% VSIZ } Vsiz X%] Set the vertical size to X% .
Increase vertical size E +VSIZ } Vsiz X%] Make the picture taller.
Decrease vertical size E –VSIZ } Vsiz X%] Make the picture shorter.
Show vertical size E VSIZ } X%] Vertical size is X% .
Auto-Image
Execute 0*A Img0 ] Execute Auto-Image and follow the current aspect ratio.
Execute and fill 1*A Img1 ] Execute Auto-Image and fill the entire output.
Execute and follow 2*A Img2 ] Execute Auto-Image and follow the input aspect ratio.
Aspect ratio
Set for fill E 1ASPR } Aspr1 ] Fill: Input automatically fills the output raster.
Set for follow E 2ASPR } Aspr2 ] Follow: Input is displayed in its native aspect ratio.
View aspect ratio setting E ASPR } X^]
NOTE: X! = Mute status 0 = off (unmute) 1 = on (mute video) 2 = on (mute video and sync)
X@ = Contrast and brightness 000 through 255 (default = 128)
X# = Detail 000 through 128 (default = 64)
X$ = Horizontal and vertical position Range depends on selected output size.
X% = Size Range depends on selected output size.
X^ = Aspect ratio 1 = fill 2 = follow
FOXBOX SR HDMI • Remote Control 23