Set carriage return-line feed, Close, Help – Extron Electronics Fiber Matrix 6400 User Manual
Page 133: Quit
A-5
Fiber Matrix 6400 Switcher • Ethernet Connection
Set carriage return-line feed
Unless commanded otherwise, Telnet transmits a line feed character only (no
carriage return) to the connected switcher when you press the
Enter
key. This is
the correct setting for SIS communication with the switcher. The Telnet
set crlf
command forces Telnet to transmit carriage return and line feed characters when
Enter
is pressed, but if crlf is set, the SIS link with the switcher does not function
properly.
Close
To close the link to the switcher, access the Telnet prompt by typing the Escape
character (
Ctrl
+
]
). At the Telnet prompt, type
close, and then press
Enter
.
Help
For Telnet command definitions, at the Telnet prompt, type
? and then press
[Enter].
Quit
Exit the Telnet utility by typing
quit and then pressing [Enter] at the Telnet
prompt. If you are connected to the Fiber Matrix switcher, access the Telnet prompt
by typing the Escape character (
Ctrl
+
]
).