Extron Electronics HDMI DA6 User Guide User Manual
Page 28
HDMI DA4 and HDMI DA6 • Updating Firmware
22
9.
In the Open dialog box, navigate to the new firmware file, which has an S19 extension,
and double‑click it.
Figure 11.
Open Window for Firmware File Selection
ATTENTION:
Valid firmware files must have the file extension
S19. A file with any
other extension is not a firmware upgrade for this product and could cause the
distribution amplifier to stop functioning.
NOTES:
•
The original factory‑installed firmware is permanently available on the HDMI DA4
or HDMI DA6. If the attempted firmware upload fails for any reason, the unit
reverts to the factory version.
•
By default, when the firmware is downloaded from the Extron site, it is saved in
one of the following paths:
C:\Program Files\Extron\Firmware\folder_name (Windows XP) or
C:\Program Files (x86)\Extron\Firmware\folder_name (Windows 7)
where folder_name may be HDMI DA4, HDMI DA6, HDMI DA, or something
similar.