Input configuration menu, Input configuration menu, Operation and setup, cont’d – Extron Electronics ISM 824 User Manual
Page 62
Operation and Setup, cont’d
ISM 824 Integration Scaling Multiswitcher • Operation and Setup
3-30
Default
Cycle
Menu
Menu
Menu
Next
Auto
Image
Input
Con guration
30 sec.
30 sec.
30 sec.
Rotate either encoder to scr
oll
through outputs #3 through #8,
or press the desired button.
Next
NOTE
The output buttons for cards
that have auto image
availability flash green.
Next
Next
Menu
Auto Image
Auto Image
<N/A>
Output #5
30 sec.
Auto Image
Output #5
Next
Other Menus
Figure 3-42 — Auto image menu
2
.
Press the Next button to enter the sublevel.
3
.
Rotate either encoder to select the desired output, or press the desired output
button.
N
When an output is selected that output button remains steady green, and other
available output buttons continue to flash green.
4
.
Press Next to exit the sublevel. Auto image is applied to that selected output.
5
.
Press the Menu button or wait for 30 seconds to return to default cycle.
Input configuration menu
This is the second menu level, and is reached by pressing the Menu button twice, or
pressing the button a number of times until the Input Configuration menu is shown
on the LCD screen.
This menu allows the user to define the signal format for any individual input. The
signal formats available are RGB (the default), YUV-HD, YUVp, YUVi, S-video, and
composite. The input signal may be processed or passed unprocessed depending
on the output selected for that input.
To configure and input signal format, do the following:
1
.
From the default cycle, press the Menu button twice to select the input
configuration menu (see figure 3-43).
2
.
Press the Next button to enter the sub level.
Default
Cycle
Menu
Menu
Menu
Menu
Input
Configuration
Auto
Image
Output Card
Configuration
30 sec.
30 sec.
Inputs #1 through #8
Next
Rotate either encoder to
select a signal format -
RGB, YUV-HD, YUVp,
YUVi, S-Video, Composite
Menu
Input #4
Other
Menu levels
S-video
Next
NOTE
When the sub menu is selected, all input buttons flash green.
Select an input by pressing its button. The button lights steady
green, and the LCD indicates the selected input. Other non
selected inputs continue to flash green.
Figure 3-43 — Input configuration menu