Extron Electronics MS9500 HD FrEND Plus - Manual (Page 72)

MS9500GL HD FrEND Plus Chapter 12: Remote Control Protocols
Startscheduler <1>
This command is used to begin a preset schedule on the player.
The ‘1” refers to Channel number and is optional.
Player will respond with:
OK “channel ‘X’ cued” or ERROR
Stopscheduler <1>
This command is used to end the currently running schedule.
The ‘1” refers to Channel number and is optional.
Player will respond with:
OK “channel ‘X’ cued” or ERROR
Scene Commands
LoadScene <Channel list> <scene name>
Loads a (pre-defined) XML ‘Scene’.
The Player will respond with:
OK or ERROR
Playback Commands
Play <Channel list>
Play the currently loaded playlist
The Player will respond with:
OK “channel ‘X’ playing” or ERROR
Stop <Channel list>
Stops the currently playing file and turn video off.
The Player will respond with:
OK “channel ‘X’ paused” or ERROR
Pause <Channel list>
Pauses the currently playing file.
The Player will respond with:
OK “channel ‘X’ paused” or ERROR
68 Rev. 1.26