Extron Electronics MPS 602 Series User Guide - Manual (Page 7)

Introduction
This section describes this guide and features of the MPS 602, including:
• About this User Guide
• About the MPS 602
• Features
About this User Guide
This guide contains information to install, configure, and operate the Extron Media
Presentation Switcher, MPS 602, MPS 602 SA, and MPS 602 MA.
In this guide, the MPS 602 can be referred to as “MPS”, “MPS 602” or “switcher”. Where
differences between the models occur, they will be called out.
About the MPS 602
The Extron MPS 602 series are six input media presentation switchers for digital and
analog sources. It offers digital video switching with three HDCP-compliant HDMI inputs
and one DTP 230 twisted pair input, and analog video switching with two RGB inputs
that are digitized for distribution to the digital output. For increased flexibility, the MPS 602
includes a DTP 230 twisted pair output and an HDMI output that are switch-selectable. The
DTP 230 input and output extend video, audio, and bidirectional control signals to DTP 230
transmitters and receivers, each over a single CATx cable up to 230 feet (70 meters). The
MPS 602 also includes several audio switching and processing features, available power
amplification, plus flexible control options for complete switching and distribution with local
and remote display support.
Features
• Internal universal power supply — The 100-240 VAC, 50-60 Hz, international power
supply provides worldwide power compatibility.
• HDMI, RGB, and audio source integration. Supports computer-video to 1920x1200,
including HDTV 1080p/60 Deep Color and 2K.
• Easy setup and commissioning with the Extron Product Configuration Software
(PCS)— Conveniently configures multiple products using a single software application.
• Inputs — Includes three HDMI, one DTP 230 twisted pair input on RJ-45, two RGB
video on 15-pin HD, five stereo balanced/unbalanced audio inputs on captive screw,
one mix audio input on captive screw.
• Outputs — Includes one selectable DTP 230 twisted pair output on RJ-45 or HDMI
output, one RGB video on 15-pin HD, one fixed audio output on captive screw, one
variable stereo audio output on captive screw, speaker outputs on 5 mm, 4-pole
captive screw connector (MPS 602 SA) or on 5 mm, 2-pole captive screw connector
(MPS 602 MA).
• Three HDMI inputs and two RGB inputs — Allow switching between HDMI and
analog video sources.
MPS 602 • Introduction 1