Introduction, About this guide – Extron Electronics MTP 15HD A Series User Guide Rev. C User Manual
Page 6
Introduction
This section gives an overview of the user guide and describes the
MTP 15HD A Series of transmitters and receivers. Covered topics are:
•
•
About the MTP Transmitters and Receivers
•
About this Guide
This guide contains installation, configuration, and operation information for two families of
Extron MTP transmitters and receivers.
•
MTP products that are compatible with:
•
•
Extron Enhanced Skew-Free AV UTP cable
•
•
Category (CAT) 5, 5e, and 6 shielded twisted pair (STP), unshielded twisted pair
(UTP), or foil shielded twisted pair (FTP) cable.
•
MTP C7 [CAT 7, C7] products that are compatible with Shielded Twisted Pair 201
(STP201) or CAT 7 cable
only.
In this guide, any reference to these products refers to either family, unless explicitly stated.
NOTE: For clarity and where applicable, in this guide, the CAT 5, 5e, 6 versions are
referred to as non-C7 MTPs.
This guide details the installation and operation of the following products:
•
MTP T 15HD A twisted pair (TP) transmitter
•
MTP RL 15HD A receiver with loop-through
•
MTP RL 15HD A SEQ receiver with loop-through and skew equalization
In this guide:
•
The term "transmitter" refers specifically to the MTP T 15HD A transmitter.
•
The term "receiver" refers to either of the receiver models — the MTP RL 15HD A or
MTP RL 15HD A SEQ.
•
The term "SEQ receiver" refers specifically to the MTP RL 15HD A SEQ receiver with
skew equalization capabilities.
MTP 15HD A Series • Introduction
1