Extron Electronics MTP_HDMI U R User Guide - Manual (Page 15)

Operation
This section of the guide discusses the operation of the MTP/HDMI U R and cover the
following points:
• Front Panel Overview
• Level and Peaking
• Signal Detection
• Setting the Jumpers
Front Panel Overview
MTP/HDMI U R
RGB
PEAKING LEVEL DIGITAL SIGNAL
ANALOG
SIGNAL
AUDIO
RS-232
VID
Y/C
YUV
RGB
3 2 5 4
1
Figure 12. MTP/HDMI U R Front Panel Features
a
LED indicator — A solid green light indicates the unit is receiving power from the
connected power supply.
b
Audio and RS-232 LEDs — These two LEDs light when either audio or RS-232 signals
are detected.
c
Analog Signal presence LED indicators — These four LEDs (VID, Y/C, YUV, or RGB)
light green when the applicable input signal is detected.
d
RGB Level and Peaking adjustment knobs — These allow adjustments to be made
to the brightness and sharpness of the MTP input video.
e
Digital Signal LED — This LED lights green when a digital signal is detected.
MTP/HDMI U R • Operation 9