Extron Electronics MLM 226 Faceplates - Manual

1 MLM 226 Faceplates • Installation Guide
MLM 226 Faceplates Installation Guide
MLM 226 Faceplates
This guide provides instructions for installing the following Extron MediaLink ™
Mounting Options faceplates, which are designed for use with the MLC 226 IP
MediaLink Controller.
The MLM 226 L, MLM 226 3GWP, or MLM 226 5GWP faceplate is shipped
with the MLC 226 IP controller, depending on the controller configuration that is
ordered. The rest of the mounting options described below may be ordered
separately as replacements, or for use with an MLC 226 IP that is ordered without
a faceplate.
• MLM 226 L — A low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W) lectern/
furniture-mounting faceplate. This faceplate is required when you are mounting
an MLC 226 IP using an optional UCM RAAP or UCM 10X8P mounting kit.
Part numbers:
70-342-02 (black), 70-342-03 (white), 70-342-05 (RAL9010 white)
• MLM 226 LAAP — A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W)
lectern/furniture-mounting faceplate with an opening that accommodates four
single-space AAPs
Part numbers:
70-343-02 (black), 70-343-03 (white), 70-343-05 (RAL9010 white)
• MLM 226 3GWP — A three-gang (4.50" H x 6.40" W [11.43 cm H x 16.26 cm W])
faceplate that can be mounted to a mud ring (mounting bracket), an Extron
Surface Mount Box, an Extron External Wall Box, or a standard electrical box
Part numbers:
70-376-02 (black), 70-376-03 (white), 70-376-05 (RAL9010 white)
68-919-01, Rev. D
08 07