Extron Electronics MLM 104 Faceplates - Manual

1 MLM 104 Faceplates • Installation Guide
MLM 104 Faceplates Installation Guide
MLM 104 Faceplates
This guide provides instructions for installing the following Extron MediaLink ™
Mounting Options faceplates, which are designed for use with MLC 104 IP Plus
MediaLink Controllers.
The MLM 104 L, MLM 104 2GWP, or MLM 104 4GWP faceplate is shipped
with the MLC 104 IP Plus controller, depending on the controller configuration
that is ordered. The rest of the mounting options described below may be
ordered separately as replacements, or for use with an MLC 104 IP Plus that is
ordered without a faceplate.
• MLM 104 L — A low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W)
lectern/furniture-mounting faceplate. This faceplate is required when you are
mounting an MLC 104 IP Plus using an optional UCM RAAP or UCM 10X8P
mounting kit.
Part numbers:
70-357-02 (black), 70-357-03 (white), 70-357-05 (RAL9010 white)
• MLM 104 LAAP — A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W)
lectern/furniture-mounting faceplate with an opening that accommodates
four single-space AAPs
Part numbers:
70-358-02 (black), 70-358-03 (white), 70-358-05 (RAL9010 white)
68-878-01, Rev. D
08 07