Extron Electronics MLC 206 Backlight Replacement Guide - Manual (Page 4)

MLC 206 Backlight Replacement Guide, cont’d
MLC 206 • Backlight Replacement Guide 4
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
9. Install the new label-holding frame from the replacement kit.
10. Insert the existing input window labels into the proper places in the frame
(where noted in step 5), or install new window labels.
11. Peel off the protective film from the new clear plastic window (if applicable)
and place the window onto the MLC to cover the labels.
12. Align the openings in the faceplate with the buttons, knobs, and LEDs of the
MLC, and place the faceplate on the MLC.
13. Finally, insert the four screws removed in step 2, and hand tighten them. The
MLC is now ready to be (re)installed in the wall or furniture.
Replacement
Included parts part number
LED backlight kit 70-245-01
(Board, #20-497-01; foam label holder, 100-162-01;
clear plastic window, 100-140-02)
DVCAM
DVD
Preset 1
Menu
Laptop 2
Laptop 1
Extr
on
Medi aLi nk C on trol ler ML C 20
6
DISPLAY
POWER
VOLUME
MA X/
MIN
Reinstall four screws.
LED Backlight
Circuit Board
Foam
Label Holder
Plastic Window
Faceplate
Align
Connectors
MLC 206 with
LED Backlight
Circuit Board (part #20-497-01)