Extron Electronics PowerCage 1600 Enclosure User Guide - Manual (Page 20)

PowerCage 1600 Enclosure • Specifications and Part Numbers 14
Video input — PowerCage FOX Tx DVI, PowerCage FOX Tx DVI Plus
Number/signal type ........................ 1 single link DVI-D (or HDMI*)
Connector ...................................... 1 female DVI-I
NOTE: *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The PowerCage
FOX DVI and DVI Plus boards can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter.
However, when using HDMI signals, these units do not transmit audio and CEC signals.
These boards do not support transmission of DVI signals with High-bandwidth Digital Content Protection (HDCP).
Video output — PowerCage FOX Rx DVI Plus
Number/signal type ........................ 1 single link DVI-D (or HDMI*)
Connector ...................................... 1 female DVI-I
Nominal level ................................. 0.8 Vp-p
Video delay .................................... 1-2 frames
Video — PowerCage FOX 3G HD-SDI
NOTE: The PowerCage FOX 3G HD-SDI is a transceiver that can function as a transmitter or as a receiver. Two
units are required for a transmitter-receiver system with one fiber optic cable linking the two units.
Signal type ..................................... HD-SDI, SDI, and 3G-SDI digital video signals
Gain ............................................... Unity
Resolution ...................................... 8 or 10 bits, automatic
Data rates ...................................... 270 Mbps, 1.485 Gbps, 2.970 Gbps
Operation standards ....................... SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120
Auto data rate lock ........................ Yes
Video input — PowerCage FOX 3G HD-SDI transmitter
Number/signal type ........................ 1 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors .................................... 1 female BNC
Data rates ...................................... 19 Mbps to 2.97 Gbps
Nominal level ................................. 0.8 Vp-p
Minimum/maximum levels .............. 0.5 V to 1 Vp-p with no offset
Impedance ..................................... 75 ohms
Return loss ..................................... ≥15 dB @ 5 MHz to 1.5 GHz
≥10 dB @ 1.5 GHz to 3 GHz
DC offset (max. allowable) ............. 5 V
Input coupling ................................ AC
Input cable equalization ................. Automatic for up to -30 dB of cable loss
HD-SDI .................................... 120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable
SDI .......................................... 150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphics card,
and display used in the system.
Video output — PowerCage FOX 3G HD-SDI receiver
Number/signal type ........................ 2 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors .................................... 2 female BNC
Re-clocking .................................... Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized
rates
Nominal level ................................. 0.8 Vp-p
Minimum/maximum levels .............. 0.5 V to 1.0 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... <-25 dB @ 100 MHz
DC offset ....................................... ±5 mV with input at 0 offset