Extron Electronics PMK 155 User Manual

Page 2

Advertising
background image

PMK 155 • Installation Guide (Continued)

68-2283-01

Rev. A 06 12

Extron Headquarters
+800.633.9876 Inside USA/Canada Only

Extron USA - West

Extron USA - East

+1.714.491.1500 +1.919.850.1000
FAX:
+1.714.491.1517 +1.919.850.1001

Extron Europe
+800.3987.6673
Inside Europe Only

+31.33.453.4040
FAX:
+31.33.453.4050

Extron Asia
+800.7339.8766
Inside Asia Only

+65.6383.4400
FAX:
+65.6383.4664

Extron Japan
+81.3.3511.7655
FAX
+81.3.3511.7656

Extron Middle East
+971.4.2991800
FAX:
+971.4.2991880

Extron China
+4000.EXTRON
+4000.398766
Inside China Only

+86.21.3760.1568
FAX:
+86.21.3760.1566

Extron India
1800.3070.3777
Inside India Only

+91-80-3055.3777
+91 80 3055 3737
FAX

Extron Korea
+82.2.3444.1571
+82.2.3444.1575
FAX

© 2012 Extron Electronics All rights reserved.

www.extron.com

3.

Attach the power supply to the underside
of the mounting plate by passing the
supplied tie wraps under the power supply,
through the raised slots in the plate, and
back over the power supply. Ensure the tie
wraps sit in the grooves on the power supply.
Tighten the ties until snug.

4.

With the installed device uppermost,
lift the plate up to the installation
location on the projector pipe. Fit the pipe clamp
around the pipe and hold it against the flange on the mounting plate.

5.

Insert the two hex bolts through the clamp holes and into the flange.

6.

Level the plate and tighten the hex bolts firmly to secure it against the pipe.
















7.

Attach input and output cables to the mounted device and thread them through the
access hole in the projector pipe to the inputs and the display device. Use the remaining
tie wraps for cable tidying.

CAUTION:

DO NOT thread the power cable through the projector pipe.

Threading the power cable through the pipe violates national
electrical regulations.

8.

Connect the power supply to an electrical outlet and turn on the device.

For configuration and operation, see the user guide for the specific device.

Power Supply

PMK 155

Half Rack Device

Power Supply

POWER

12V

3A M

AX

OUTPU

T

100

V

INPUT

S

L (M

ONO

)

(M

ONO

)

R

REMOT

E

VOL/MUTE

MP

A 401-10

0V

R

L

CLASS

2 WI

RING

DO NO

T GRO

UND

OR

SHO

RT

SPEAKE

R OU

TPU

TS!

10V

50m

A

US

LISTE

D

17TT

AUD

IO/VID

EO

APPA

RATU

S

®

MPA 401

Advertising