Extron Electronics RGB 460xi Series Setup Guide User Manual

Rgb 460xi series • setup guide, Disconnect power, Attach aaps

Advertising
background image

1

Product Category

RGB 464xi

INPUT

MONITOR

H. SHIFT

MIN/MAX

AUDIO

VIDEO

S-VIDEO

AUDIO

L/MONO

R

NO MONITOR

MONITOR

Disconnect Power

Turn off all equipment. Disconnect the computer, the interface, and output devices from the power source.

Attach AAPs

Attach any optional AAPs to the interface (RGB 468xi, RGB 468 Mxi, or RGB 468xi AKM UK only), before connecting cables
(see the RGB 460xi Series User Guide for more details).

Set DIP Switches

A bank of DIP switches, (see item

a

on the rear panel diagram on the next page), controls various options. Moving a switch

up sets it On as shown by switch 7 at right. Moving it down sets it Off.

NOTE: The default for all DIP switches, except switch 7, is off (down). Switches 7 and 8 work

together for sync routing. They cannot both be set to on, nor can both be set to off.

Switch

Number

Function

Setting

Description

1

Sync on green

Off

Outputs separate horizontal and vertical sync on the H and V
connectors for RGBHV.

On

Outputs sync on green (SOG).

2

Composite sync

Off

Outputs RGBHV or RGsB video.

On

Outputs combined horizontal and vertical sync for RGBS.

3

Digital Display Sync Processing
(DDSP™)

Off

Interface performs sync process operations with Advanced
Digital Sync Processing (ADSP™).

On

Interface uses DDSP.

4

Serration pulse

Off

Serration pulses are off.

On

Serration pulses are on.

5

Vertical sync pulse width

Off

Wide

On

Narrow

6

Negative sync

Off

Output sync same as input.

On

Output sync for to negative polarity.

7

Composite sync routing

Off

Must be set to Off if switch #8 is On.

On

Sync routing to 15-pin HD local monitor for all Macintosh

®

(other than 13 inch) and VGA monitors (default).

8

Off

Must be set to Off if switch #7 is On.

On

Sync routing to 15-pin HD local monitor for Macintosh 13 inch
monitors.

RGB 460xi Series • Setup Guide

This guide provides basic instructions for an experienced technician
to install the Extron RGB 46x series of architectural adapter plates
(AAP) plates.
For additional details see the RGB 460xi Series User Guide at

www.extron.com.

3 4 5 6

1 2

7 8

Closed / On

Open / Off

Advertising