Extron Electronics TLP Pro 720C Setup Guide User Manual
Tlp pro 720c • setup guide, Overview, Setup checklist
1
Product Category
TLP Pro 720C • Setup Guide
Overview
The Extron TLP Pro 720C is a 7 inch Cable Cubby touchpanel with a flip-up, 800x480 LCD touchscreen with 18-bit color depth.
It is ideal for any AV application requiring a full-size, Cable Cubby touchpanel with a customizable interface. This guide provides
instructions for experienced installers to mount and install a TLP Pro 720C touchpanel. For more complete instructions, see the
TLP Pro 720C User Guide, at
Setup Checklist
Get Ready
Download and install the latest version of the following software:
Global Configurator Professional or Global Configurator Plus — for setting up and configuring the control processor and
touchpanel.
GUI Designer — for designing layouts for Extron TouchLink
®
Pro touchpanels and third party touch interfaces.
Both software programs are available from
Obtain the following network information from your network administrator:
DHCP status (on or off). If DHCP is off, you will also require
IP address
Subnet mask
Gateway
User name — by default these are either
admin or user.
Passwords — by default these are either
extron (for admin) or the field is left blank (for user).
Make a note of the touchpanel MAC address.
Make sure you are familiar with all the included parts and have all the
(see page 2) for installing the cable
cubby.
Included Parts
With Power
Module
Without Power
Module
AC Power Module*
1
0
Pass-through AAPs
†
3
3
Blank AAPs
6
6
1-position bracket kit
0
1
2-position bracket kit
3
4
3-position bracket kit
1
1
NOTES:
*
Inside the US, the TLP Pro 720C can be purchased with or without an AC power module. Outside the US, see
to find an AC power module for your country.
†
Active or Passive AAPs must be purchased separately (see
).
TLP Pro 720C
Table Clamps
AC Power Module*
Blank AAPs
Pass-thru AAPs
Ext
ron
Ext
ron
Extron
Removal Tool
Zip Ties
#4−40 Screws
and Nuts
2 Pos
AAP Shelf Bracket Kits
(2 brackets/kit)
3 Pos
1 Pos