Extron Electronics TLP 350MV User Guide - Manual (Page 21)

5. Click on the Touchpanel tab, which allows the user to alter the touchpanel and
volume settings. These correspond to the
Main settings (see page 8) and Volume
settings (see page 9) in the on-screen menus.
Figure 17. Touchpanel Configuration
Updating the Firmware
Firmware for the TLP 350MV can be upgraded using the Extron Firmware Loader or using
your web browser. Before starting, consult your IT team and ensure that the TLP 350MV has
a unique IP address.
Updating Firmware Using Extron Firmware Loader
1. Power on a computer that is connected to the same network as the TLP 350MV.
2. Install the Extron Firmware Loader utility onto the computer if it is not already present.
This is on the software disc that ships with unit or can be downloaded, free of charge,
from the Extron web site (
www.extron.com ).
To install from the disc, insert the disc into the DVD-ROM drive of the computer and
follow the same procedure as for
installing the GUI Configurator and Global
Configurator programs (see page 12).
To install from the Extron web site ( www.extron.com ), select the Download tab and
click on the Software tab, locate the Firmware Loader and click Download. Follow
the on-screen instructions to complete installation.
TLP 350MV • Configuration Software 15