Extron Electronics TLP 350CV Installation - Manual (Page 47)

Updating Firmware
Firmware for the TLP 350CV can be upgraded using the extron Firmware Loader, a web
browser and the default web pages, or GUI Configurator. before starting, consult your IT
team and ensure that the TLP 350CV has a unique IP address.
before an upgrade, visit
www.extron.com to obtain the latest firmware.
NOTE: The factory default IP address for the TLP 350CV is 192.168.254.254. Consult
with your IT Department to ensure all IP addresses are correctly assigned.
Obtaining the Firmware Update File
Firmware update files are located on the software disc that ships with unit or can be
downloaded, free of charge, from the extron website (
www.extron.com ).
To download a firmware file to a computer:
1. Power on a computer with internet access.
2. To download firmware for the TouchLink panel unit:
a. From the Software Products disc, insert the disc into the DVD ROM drive and select
the Firmware tab. Locate the firmware file and click Install. Follow the on-screen
instructions to download the file. Note the file location.
b. From the extron web site ( www.extron.com ), select the Download tab, then click
on the Firmware selection. Locate the firmware file and click Download. Follow
the on-screen instructions to download the file. Note the file location.
Figure 28. Extron Web Page — Download Center
3. Use the update method of your choice to install the new firmware.
41 TLP 350CV • Reset Modes and Button Replacement