Extron Electronics USB A to 4-Pin Captive Screw Terminal Wiring User Manual
Usb a to 4-pin captive screw terminal wiring, Wiring instructions
Advertising
4
3
2
1
432
USB cable
1
Front
USB A to Captive Screw AAP/MAAP
Side
USB A
Connector
Stereo
Jack
USB A to 4-Pin Captive Screw Terminal Wiring
Wiring Instructions
This card illustrates how to connect a standard USB A/B or A/mini-B cable to the AAP/MAAP
using the captive screw connector. As shown in the figure below, USB cable wires (stripped
from the USB B end of the cable) are passed through the captive screw connector in the same
order as in the USB A connector.
For step-by-step wiring instructions, see the other side of this card.
Pin# Signal Typical Color
1 +5 (Vbus) Red
2 Data- White
3 Data+ Green
4 Gnd Black
Advertising