Extron Electronics UCM 100 EU AAP Removal Procedure for MLC 62 EU User Manual
2011 extron
© 2011 Extron
®
Electronics. All rights reserved.
68-1731-52
Rev. A
06 11
UCM 100 EU AAP Removal Procedure for MLC 62 EU
The UCM 100 EU AAP wallplate enables an
MLC 62 EU controller to be mounted in a quadruple
space architectural adapter plate (AAP) frame in areas
of limited space. The controller can be mounted either
horizontally or vertically within the UCM 100 frame to
fit the available mounting space (see the illustrations at
right).
If it becomes necessary to remove the controller from the UCM 100 following installation,
follow these steps:
1.
Remove the UCM 100 with the controller from the AAP plate.
2.
From the rear of the unit, pinch the two tabs on the opposite sides of the controller
inward.
3.
While continuing to hold in the tabs, slide the controller out through the front of the
frame.
Extron
VOLUME
DISPLAY
ON
OFF
VIDEO
PC
MUTE
LAPTOP
Extron
VOLUME
DISPLAY
ON
OFF
VIDEO
PC
MUTE
LAPTOP
MLC 62 RS EU
UCM 100 EU AAP
Push Tabs
to Release
RS-232
IR/ S
RELAYS
N/O
PWR
12V
0.2A max
H
OS
T/
CONFIG
DIG
IT
AL
IN
PU
T
+
Tx
Rx
1
Tx
Tx/
IR
1
2
C
R
VOLUME
DISPL
AY
MUTE
LAPTOP
OFF
ON
PC
VIDE
O