Extron Electronics ZipCaddy 200 - Manual

ZipClip and Caddy Mounting • Installation 1 ZipClip and Caddy Mounting • Installation 4
Installation, cont’d
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX +81.3.3511.7656 www.extron.com
68-1564-01 Rev. A
07 08
ZipClip 200 and ZipCaddy 200 Mounting
Kit Installation Guide
Getting Started
This manual contains installation instructions for the Extron
ZipClip 200 and ZipCaddy 200 Mounting Kit (part #101-001-01).
The kit consists of two parts: the ZipClip 200 holster that mounts
to the furniture or a rack mount system, and the ZipCaddy
200 Mounting plate that mounts one 1/4 rack or two 3" deep
1/8 rack Extron enclosures. As an option, the ZipCaddy 200
mounting plate may be mounted directly to furniture without
the ZipClip 200 holster
Included Parts
These parts are included in each ZipClip 200 and ZipCaddy 200
Mounting Kit.
Cable Ties (4) Device Screws (4)
ZipClip 200 ZipCaddy 200
Mounting Self-tapping Screws (4)
Included parts Replacement part
number
(1) ZipClip 200 21-103-01LF
(1) ZipCaddy 200 21-141-01LF
(4) Cable tie wraps 40-007-02LF
(4) Device mounting screws 40-206-01LF
(4) ZipClip mounting screws 40-519-03LF
Installation guide
The Quick-Release Tab
The ZipClip 200 feature allows the caddy-mounted device (see
”1: Attaching Devices to the ZipCaddy 200”) to be quickly and
conveniently attached and detached from the mounting location
without the use of tools.
The channeled edges of the
ZipCaddy 200 snap into the locking
fingers of the ZipClip 200. The
ZipCaddy 200 mounting plate is
detached from the ZipClip 200
holster by depressing the quick-
release tab, as shown on the right.
Specifications
Mounting
Rack mount ........................ Yes, with required hardware
Furniture mount ................ Yes, with included hardware
Enclosure type ............................... High impact plastic
Enclosure dimensions
ZipClip 200 ......................... 5.3" H x 4.6" W x 0.6" D
(13.5 cm H x 11.6 cm W x 1.5 cm D)
ZipCaddy 200 .................... 4.4" H x 4.3" W x 0.4" D (mounts quarter
rack or one-eighth rack wide, 3" deep
products)
(11.3 cm H x 11.0 cm W x 1.0 cm D)
Product weight .............................. 0.3 lbs (0.1 kg) per each clip and plate pair
2.8 lbs (1.3 kg) per 10-pack
Shipping weight ............................ 3 lbs (2 kg) per 10-pack
Vibration ......................................... ISTA 1A in carton (International Safe
Transit Association)
Warranty ......................................... 3 years parts and labor
N Specifications are subject to change without notice.
4