Extron Electronics PCA 100 User Manual
Pca 100 (pipe coupling adapter), Specifications
Installation Notes
PCA 100 (Pipe Coupling Adapter)
Overview
The PCA 100 is a female to female pipe coupling adapter. Each end of the PCA 100 has 1½" NPSC (National Pipe Straight
Coupling) internal threads. The PCA connects two 1½" NPT male ended pipes together to create an extended pipe. The PCA
locks the pipes into place with set screws.
The PCA 100 is for use with the PMP series of projector mounting poles in combination with several other Extron projector
mounting products, such as the UPB 25 (Universal Projector Bracket), PCM 240 (Projector Ceiling Mount), ACMP 100 (Angled
W
The maximum load the PCA will suspend is 500 lbs (227 kg). DO NOT attempt to exceed.
Installation
To connect two pipes using a PCA adapter do the following:
1
.
Screw the PCA onto the end of one pipe until snug.
2
.
Lock the pipe into place with the set screws, using the supplied 3/32" hex key.
3
.
Screw the other pipe up into the PCA until snug.
4. Lock the second pipe in place with the set screws.
Figure 1 — PCA 100 Pipe Coupling Adapter
W
Ensure the complete installation does NOT exceed 500 lbs (227 kg).
C
Do not exceed specified weight limits of any component of the installation. Follow the manufacturer's
specifications and installation instructions.
Specifications
Material ........................................... Steel
Color/finishes ................................ White or black powder coat
Coupling dimensions ................... 1.5" - 11.5 NSPC, 2.06" Length
Product weight .............................. 0.33 lbs (0.15kg)
Shipping weight ............................ 0.50 lbs (0.23 kg)
Vibration ......................................... ISTA 1A in carton (International Safe Transit Association)
Warranty ......................................... 3 years parts and labor