Extron Electronics Projection Shoot-Out Volume 2.0 - Manual (Page 14)

Produced and distributed by Extron ® Electronics
© 2007 InfoComm International ®
User Guide
Note: A unique copy of this software is required for each computer to be used and/or networked
4
Use the chapter ‘skip forward’ and ‘skip backward’ keys to move between patterns. By using your navigation keys, you
may advance forward and backward among the patterns. The patterns are setup into a rotational sequence and will repeat
with repeated button presses. The title of each pattern is accessed by enabling the “subtitles” button on your DVD player
remote control. When the subtitle is activated, the title of the pattern will display at the bottom of the screen.
Note that the test patterns for interlaced formats, like NTSC, PAL, and 080i high definition may exhibit single field flicker
when paused. On some players, both fields of the interlaced video format are stored so that a full frame is shown. On other
players, only one field may be shown which will present a flickering image. This type of performance is a function of the
DVD player you are using. You may expect that different makes of DVD players will perform differently. Should you experi-
ence difficulty with displaying the test pattern correctly in the paused mode, use the A-B repeat function of the player to
continuously repeat the chapter of the desired test pattern. This method should provide the best quality image.