Extron Electronics SC 210 User Guide - Manual

User’s Manual
Rack Mounting
Output
Input
SC 210
Extron interface
Local monitor
Computer
Large screen
Graphics projector
Mounting the SC 210 on a 1U Rack Shelf
A 1U Rack Shelf will accommodate two units the size of an
SC 210. These devices have two threaded holes in their base
plates for this purpose.
1. If the SC 210 has feet, remove them.
2. Align the SC 210 over the shelf so that its two threaded holes
line up with two holes in the 1U shelf.
3. Use two 4-40 x 1/8" screws to
mount the SC 210 to the shelf.
4. If the shelf is not already mounted in the rack, use the supplied
hardware and follow the instructions that came with the
1U Shelf (part # 60-190-01).
5. When mounted, continue the installation by connecting the
input, output and power cables.
Sync Combiner
68-201-01 Rev. B
05 02
Printed in the USA
SC 210
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe
Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.