Extron Electronics UCM Series Installation User Manual
Ucm series installation guide
UCM Series • Installation Guide
UCM Series Installation Guide
68-879-01
Rev.
C
09 06
This guide provides an overview of how to install an Extron UCM Series mounting
option.
The UCM Series are universal controller mounting options designed to
accommodate various Extron controllers (e.g., a MLC 206 or SCP 150) as well as
eight single-space architectural adapter plates (AAPs).
In order to mount an Extron controller to a UCM Series panel, a 3.15" tall lectern
faceplate and its respective controller must be purchased separately. The lectern
faceplate can be purchased as a package with the controller (e.g., a MLC 206-L) or
as a stand alone faceplate (e.g., a MLM 206-L). Check with an Extron representative
for details.
The UCM Series consists of the following models:
UCM-RAAP
– 2U high 3.5" H x 19.0" W (8.9 cm H x 48.3 cm W),
rack-mounting faceplate with eight single-space AAP openings.
Black: #70-344-02, or White: #70-344-03
UCM-10X8P
– 8.25" H x 10.25" W (21.0 cm H x 26.0 cm W) faceplate with
eight single-space AAP openings; it can be mounted to a mud ring or
Hoffman box. Black: #70-341-02, or White: #70-341-03
Assembly of the UCM-RAAP is shown below with an optional MLC 206 controller
and MLM 206-L lectern faceplate; other UCM mounting options are assembled in a
similar way.
To assemble a UCM universal mounting option, do the following:
1.
Cable the enclosure or box in preparation for the UCM panel and its
components (refer to the cabling information provided in the controller
documentation).
2.
Attach the lectern faceplate and controller to the UCM panel by using the four
provided Phillips flat head screws, and securing them from the back with nuts
(refer to the lectern faceplate documentation for information on how to attach
the controller to the lectern faceplate).
3.
Attach the AAPs to the UCM panel.
4.
Cable all components within the UCM panel (refer to the cabling information
provided in the controller documentation).
5.
Align the UCM panel with the opening of the enclosure or box and secure it
using the remaining screws.
VC
R
Ext
ron
Me
dia
Lin
k C
on
tro
ller
ML
C 2
06
DISPLA
Y
PO
WER
VO
LU
ME
MA
X/
MIN
Remove four screws.
Plastic Window
Faceplate
MLM-WB+
(60-458-0X)
UCM-RAAP
Mounting Option
(70-344-0X)
MLC 206
Controller
(60-385-0X)
MLM 206
Mounting Option
(70-305-0X)
Med
iaLin
k