Extron Electronics ES3610_11 Quick Start - Manual (Page 2)

Page 2 I449GB issue 3
Checking the Contents of the Box
Before using or installing this unit check that the following items have been supplied:
• VN-GLIMPSE RGB ADAPTER
• 12V Power Supply Unit (PSU)
• Mains Power Cords (2 off)
3-pin plug version – for USA customers
unterminated version – for Europe and elsewhere (see Plug Wiring Details below)
• Mouse/Keyboard Cable (2 metre PS/2 to PS/2) (2 off)
• Digital Monitor Cable* (2 metre DVI-D to DVI-D)
• Analog Monitor Cable* (2 metre 15-pin HD-type to DVI-A)
• DVI-A to 15-pin HD-type Adapter
• Clip-on Ferrite* (for supplied Monitor cable – see Important Note below)
• Software Disc
If any items are missing or damaged please contact your supplier.
* IMPORTANT NOTE: Whether you are using the Digital or Analog Monitor Cable, it
must be fitted with the Clip-on Ferrite. Position the ferrite nearest to the end of the
cable that connects to the DVI- I IN connector on the VN-GLIMPSE RGB ADAPTER.
Refer to the connection diagrams on pages 4 & 5.
Plug Wiring Details
The wires of both mains power cords (supplied with each RGB ADAPTER) are color-
coded as shown in the table below; be sure to connect your plug in accordance with
the following guidelines:
Connect the wire colored... to the plug terminal identified with...
Brown ‘L’ or ‘Live’ or ‘Line’
(or colored red or brown)
Blue ‘N’ or ‘Neutral’
(or colored blue or black)
Green & Yellow ‘E ’ or ‘E’ or ‘Earth’ or ‘Ground’
(or colored green or green & yellow)
WARNING — If you are unsure of the connections, or if
the markings in your plug do not match those given above,
CONSULT A QUALIFIED ELECTRICIAN.
NOTE: The PSU is double-insulated and does not require an earth/ground connection.
However, the earth cable of the mains lead must be connected in the plug.