Wash options, Multi-functional tablets, Tabs) – Hotpoint Ariston LFFA+ 8M14 User Manual

Page 7: Half load using the upper rack, Delayed start, Extra drying

Advertising
background image

EN

7

Multi-functional tablets

(Tabs)

This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator
light will illuminate. The “Multi-functional tablets” option results
in the lengthening of the wash cycle.

The MULTI-FUNCTIONAL TABLETS option remains

set for subsequent wash cycles if it is not deselected.

The use of tablets is only recommended for models

which offer the MULTI-FUNCTIONAL TABLETS option.

This option is not recommended for use with wash

cycles which do not specify the use of multi-functional
tablets

(

see Table of options).

*

Only available in selected models.

Half load using the upper rack

If there are not many dishes to be washed, a half load cycle may
be used in order to save water, electricity and detergent. Select
the wash cycle and press the HALF LOAD button: the indicator
light will illuminate and the wash cycle will take place only in the
upper rack.

Remember to load the upper rack only, and to reduce

the amount of detergent accordingly.

It is better to use powder detergent in this case.

This option is not compatible with the following wash

cycles: Speed and Baby.

Delayed start

It is possible to delay the start time of the cycle for a period of
time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other options,
press the DELAYED START button: the corresponding indicator
light will illuminate. Use the same button to select the time at which
you wish the wash cycle to begin (after a period of 1 to 24 hours).
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period indicator light
flashes and the Start/Pause button stops flashing (the light
becomes fixed instead).
3. When the set time has elapsed, a long beep sounds, the
DELAYED START indicator light switches off and the wash cycle
begins.
To deselect the DELAYED START option, press the DELAYED
START button repeatedly until the text OFF appears.

The Delayed Start function cannot be set once the wash

has been started.

Wash options*

The OPTIONS may only be set, modified or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.

Only the options which are compatible with the type of wash cycle
set may be selected. If an option is not compatible with the se-
lected wash cycle (

see Table of wash cycles), the corresponding

LED flashes rapidly 3 times and 2 short beeps will sound.

If an option is selected which is incompatible with another (previ-
ously selected) option, the indicator light corresponding to the
option selected first will flash 3 times, 3 beeps will sound and it will
be deselected, while the most recently selected option will remain
active.
To deselect an option which has been set by mistake, press the
corresponding button again.

Extra drying

*

To improve the dryness level of the crockery, press the EXTRA
DRYING button; the indicator light will illuminate. If it is pressed
again the option will be deselected.

The EXTRA DRYING option increases the duration of

the wash cycle.

A

B

C

D


Table of options Delayed

Start

Half

Load

Tabs

Extra

Dry

Eco

Yes

Yes

Yes

Yes

Normal

Yes

Yes

Yes

Yes

Daily A 60

Yes

Yes

Yes

No

Soak

Yes

Yes

No

No

Intensive

Yes

Yes

Yes

Yes

Speed 25’

Yes

No

Yes

No

Crystal

Yes

Yes

Yes

Yes

Baby wash

Yes

No

No

No

Advertising